Answer:
critical stress = 595 MPa
Explanation:
given data
fracture toughness = 74.6 MPa-
crack length = 10 mm
f = 1
solution
we know crack length = 10 mm
and crack length = 2a as given in figure attach
so 2a = 10
a = 5 mm
and now we get here with the help of plane strain condition , critical stress is express as
critical stress = 
......................1
put here value and we get
critical stress = 
critical stress = 595 MPa
so here stress is change by plane strain condition because when plate become thinner than condition change by plane strain to plain stress.
plain stress condition occur in thin body where stress through thickness not vary by the thinner section.
Environmentally friendly
Since it focuses on are sustainable and efficient with and are made with the future in mind.
Answer: I am not for sure
Explanation:
Answer:
(i) 169.68 volt
(ii) 16.90 volt
(iii) 16.90 volt
(iv) 108.07 volt
(v) 2.161 A
Explanation:
Turn ratio is given as 10:1
We have given that input voltage 
(i) We know that peak voltage is give by 
(ii) We know that for transformer 
So 
So peak voltage in secondary will be 16.90 volt
(iii) Peak voltage of the rectifier will be equal to the peak voltage of the secondary
So peak voltage of the rectifier will be 16.90 volt
(iv) Dc voltage of the rectifier is given by 
(v) Now dc current is given by 
