Is if not then don’t sue me pls
Explanation:
I won't answer each of these, but will give you an explaination of how to solve for each.
You'll need to use Ohm's Law and Kirchhoff's Voltage Law.
Remember Ohm's Law as .
Kirchoff's Voltage Law says that the sum of voltages for a given circuit "loop" must equal zero. In the circuit shown, this means that the voltage provided by the battery (E_T) equals the voltage drop across each of the three resisters in the loop.
A couple of other helpful notes:
These three resistors are in <em>series</em> which means that the current flowing through them is equal.
So it is easy to see that...
Solve for the voltage across E_2 and E_3. The sum of the three voltages equals the voltage of the battery (E_T).
After the emulsion is made, fuel droplet containing water droplets increase its temperature inside the engine, because of that, water droplets explode causing water rapid evaporation that break down fuel droplet, in consequence, smaller fuel droplets are generated. This makes the temperature of the flame during the combustion decrease, and that is why the reduction of NOx is accomplished by this method
.
By increasing magnification you decrease the field of view.
The answer is A.
Hope this helps.
r3t40
Answer: Regardless of feature size (RFS)
Explanation:
It is a pre-selected condition for every geometric tolerance which is the second rule of GD&T and it requires no repairs, it is adopted when size feature has no effect on defined tolerance. RFS implies that GD&T callout is not dependent on size dimension. Least Material Condition (LMC) cancels out this rule.
•Reasons for using RFS.
1. It can not be easily determined.
2. It can be used anytime but can be ignored if it is specified.