I didnt see the answers for answer your question
The two dimensions of aluminum foil are given 13.72 cm and 8.63 cm respectively with mass 3.1 g.
The density of aluminum is
. It is defined as mass per unit volume thus, volume of aluminum can be calculated as follows:

Putting the values.

The volume of cuboid is
, the length and breadth are given, height can be calculated as follows;

Putting the values,

Or, approximately 9.7\times 10^{-3}cm
Therefore, thickness of aluminum foil is 
Answer:
Explanation:
You should allow the solvent to drop to the level of the adsorvent, so it would never run dry.
When you let your sample to run dry it will never finish to flow from the adsorbent depending of it polarity.
Water should not be used because it can dissolve the adsorbent.
You could use another technique to identify the compound, as an infrared or a ultraviolet detector. You can also, if you know the compounds, identify it for the retention time, for example, if you need to detect two compounds, one more polar than the other, and use a polar adsorbent and a non-polar solvent, the first compound to exit the column will be the less polar one, because it will have a bigger interaction with the solvent than the stationary phase (adsorbent) and will go faster, the second will be the more polar one, because it will have a bigger interaction with the stationary phase.
Answer:
They are solid (with the exception of mercury, Hg, a liquid).
They are shiny, good conductors of electricity and heat.
They are ductile (they can be drawn into thin wires).
They are malleable (they can be easily hammered into very thin sheets).
If this satisfies you please consider giving me brainliest :)