Answer:
component of acceleration are a = 3.37 m/s² and ar = 22.74 m/s²
magnitude of acceleration is 22.98 m/s²
Explanation:
given data
velocity = 10 m/s
initial time to = 0
distance s = 400 m
time t = 14 s
to find out
components and magnitude of acceleration after the car has travelled 200 m
solution
first we find the radius of circular track that is
we know distance S = 2πR
400 = 2πR
R = 63.66 m
and tangential acceleration is
S = ut + 0.5 ×at²
here u is initial speed and t is time and S is distance
400 = 10 × 14 + 0.5 ×a (14)²
a = 3.37 m/s²
and here tangential acceleration is constant
so velocity at distance 200 m
v² - u² = 2 a S
v² = 10² + 2 ( 3.37) 200
v = 38.05 m/s
so radial acceleration at distance 200 m
ar = 
ar = 
ar = 22.74 m/s²
so magnitude of total acceleration is
A = 
A = 
A = 22.98 m/s²
so magnitude of acceleration is 22.98 m/s²
Answer:
Otto engine
Explanation:
As we know that
Power = Torque x speed
So we can say that when speed of engine then power of engine also will increases.
The speed of Otto engine is more as compare to Diesel engine so the power of Otto engine is more.But on the other hand torque of Diesel engine is more as compare to Otto engine but the speed is low so the product of speed and torque is more for Otto engine .It means that when requires large amount of power then Otto engine should be use.
Answer: d)Coercion
Explanation:Tool wear is defined as the situation when the cutting tool is subjected to the regular process of cutting metal then they tend to wear because of the continuous action of cutting and facing stresses and pressure . The mechanism that does not happen during this process are coercion that means the process of exerting forces on any material forcefully against the will or need. Therefore, adhesion,attrition and abrasion are the process of tool wear .So the correct option is (d)
Answer:
the evaluation in SI unit will be 
Explanation:
We have evaluate 
We know that 1 mm 
So 240 mm 
Newton can be written as 
So 
So the evaluation in SI unit will be
