Answer:
Conductor
Explanation:
Current is carried by a conductor.
__
The purpose of a dielectric and/or insulator is to prevent current flow. An electrostatic field may set up the conditions for current flow, but it carries no current itself.
Answer with Explanation:
The modulus of elasticity has an profound effect on the mechanical design of any machine part as explained below:
1) Effect on the stiffness of the member: The ability of any member of a machine to resist any force depends on the stiffness of the member. For a member with large modulus of elasticity the stiffness is more and hence in cases when the member has to resist a direct load the member with more modulus of elasticity resists the force better.
2)Effect on the deflection of the member: The deflection caused by a force in a member is inversely proportional to the modulus of elasticity of the member thus in machine parts in which we need to resist the deflections caused by the load we can use materials with greater modulus of elasticity.
3) Effect to resistance of shear and torque: Modulus of rigidity of a material is found to be larger if the modulus of elasticity of the material is more hence for a material with larger modulus of elasticity the resistance it offer's to shear forces and the torques is more.
While designing a machine element since the above factors are important to consider thus we conclude that modulus of elasticity has a profound impact on machine design.
Answer:
Explanation:
Let assume that heating and boiling process occurs under an athmospheric pressure of 101.325 kPa. The heat needed to boil water is:
![Q_{water} = (1.4\,L)\cdot(\frac{1\,m^{3}}{1000\,L} )\cdot (1000\,\frac{kg}{m^{3}} )\cdot [(4.187\,\frac{kJ}{kg\cdot ^{\textdegree}C} )\cdot (100^{\textdegree}C-25^{\textdegree}C)+2257\,\frac{kJ}{kg}]](https://tex.z-dn.net/?f=Q_%7Bwater%7D%20%3D%20%281.4%5C%2CL%29%5Ccdot%28%5Cfrac%7B1%5C%2Cm%5E%7B3%7D%7D%7B1000%5C%2CL%7D%20%29%5Ccdot%20%281000%5C%2C%5Cfrac%7Bkg%7D%7Bm%5E%7B3%7D%7D%20%29%5Ccdot%20%5B%284.187%5C%2C%5Cfrac%7BkJ%7D%7Bkg%5Ccdot%20%5E%7B%5Ctextdegree%7DC%7D%20%29%5Ccdot%20%28100%5E%7B%5Ctextdegree%7DC-25%5E%7B%5Ctextdegree%7DC%29%2B2257%5C%2C%5Cfrac%7BkJ%7D%7Bkg%7D%5D)
The heat liberated by the LP gas is:
A kilogram of LP gas has a minimum combustion power of 
. Then, the required mass is:
Answer:
Explanation:
Using the kinematics equation 
to determine the velocity of car B.
where;
initial velocity
= constant deceleration
Assuming the constant deceleration is = -12 ft/s^2
Also, the kinematic equation that relates to the distance with the time is:
Then:
The distance traveled by car B in the given time (t) is expressed as:
For car A, the needed time (t) to come to rest is:
Also, the distance traveled by car A in the given time (t) is expressed as:
Relating both velocities:
t = 2.25 s
At t = 2.25s, the required minimum distance can be estimated by equating both distances traveled by both cars
i.e.
d + 104.625 = 114.75
d = 114.75 - 104.625
d = 10.125 ft
It is accurate to say that site engineering does not require particular consideration for soils with low percolation rates.
<h3>What are percolation rates?</h3>
- The rate at which water percolates through the soil is a measure of its ability to absorb and treat effluent, or wastewater that has undergone preliminary treatment in a septic tank.
- Minutes per inch are used to measure percolation rate (mpi).
- The process of a liquid gently moving through a filter is called percolation. This is how coffee is typically brewed.
- The Latin verb percolare, which meaning "to strain through," is the source of the word "percolation." When liquid is strained through a filter, such as when making coffee, percolation occurs.
To learn more about percolation rates, refer to:
brainly.com/question/28170860
#SPJ4
