All categories

3 years ago

He engine in Problem 3.8 produces 57kW of brake power at 2000 RPM. Calculate:

Engineering

1 answer:

Serjik [45]3 years ago

3 0

Answer:

Answer is below attached.

Explanation:

You might be interested in

Sinks must be used for the correct intended purpose to prevent

irakobra [83]

Answer:

... spilling water or getting anything cascading onto the floor

8 0

3 years ago

A large plate is fabricated from a steel alloy that has a plane strain fracture toughness of 55 MPa √m (50 ksi √in.). If, during

astra-53 [7]

Answer:

0.024 m = 24.07 mm

Explanation:

1) Notation

$\sigma_c$ = tensile stress = 200 Mpa

$K$ = plane strain fracture toughness= 55 Mpa $\sqrt{m}$

$\lambda$ = length of a surface crack (Variable of interest)

2) Definition and Formulas

The Tensile strength is the ability of a material to withstand a pulling force. It is customarily measured in units (F/A), like the pressure. Is an important concept in engineering, especially in the fields of materials and structural engineering.

By definition we have the following formula for the tensile stress:

$\sigma_c=\frac{K}{Y\sqrt{\pi\lambda}}$ (1)

We are interested on the minimum length of a surface that will lead to a fracture, so we need to solve for $\lambda$

Multiplying both sides of equation (1) by $Y\sqrt{\pi\lambda}$

$\sigma_c Y\sqrt{\pi\lambda}=K$ (2)

Sequaring both sides of equation (2):

$(\sigma_c Y\sqrt{\pi\lambda})^2=(K)^2$

$\sigma^2_c Y^2 \pi\lambda=K^2$ (3)

Dividing both sides by $\sigma^2_c Y^2 \pi$ we got:

$\lambda=\frac{1}{\pi}[\frac{K}{Y\sigma_c}]^2$ (4)

Replacing the values into equation (4) we got:

$\lambda=\frac{1}{\pi}[\frac{55 Mpa\sqrt{m}}{1.0(200Mpa)}]^2 =0.02407m$

3) Final solution

So the minimum length of a surface crack that will lead to fracture, would be 24.07 mm or more.

7 0

3 years ago

THIS SIGN MEANS: A. The right lane will end ahead B. The highway will be divided ahead C. Less space between lanes ahead

hodyreva [135]

B.) the highway will be divided ahead

7 0

3 years ago

Supercharged engine what it does to the car

geniusboy [140]

Answer:

A supercharger is an air compressor that increases the pressure or density of air supplied to an internal combustion engine. This gives each intake cycle of the engine more oxygen, letting it burn more fuel and do more work, thus increasing power.

Explanation:

3 0

3 years ago

Read 2 more answers

Which of the following would most likely be operated by a sequential control system?

Rudiy27

Answer:pizza oven

Explanation:

7 0

2 years ago

Read 2 more answers