Ask question

Ask question

All categories

3 years ago

11

You decide to use a battery labeled “850 mAh 2S” with a total voltage of 7.4 V. What is the overall energy capacity of the batte

ry?

1 answer:

kati45 [8]3 years ago

3 0

Given Information:

Ampere-hour of battery = 850 mAh

Voltage of battery = 7.4 V

Required Information:

Overall energy Capacity of battery = ?

Answer:

Overall energy Capacity of battery = 22.64 kJ

Explanation:

The overall energy capacity of the battery is found by

Energy = Ah*Voltage*3600

Convert mili-Ampere-hour into Ampere-hour

850/1000 = 0.85 Ah

Energy = 0.85*7.4*3600

Energy = 22,644 J

or

Energy = 22.64 kJ

Therefore, the overall energy capacity of the battery in Joules is 22.64 kJ

Note:

The factor 3600 is used since there are 60*60 seconds in 1 hour

Charge = current*time

Energy = voltage*charge

Energy = current*voltage*time

You might be interested in

What would happen if the brake pedal was released while the bleed screw was open during brake bleeding?

quester [9]

The breaking fluent would squirt out

8 0

2 years ago

Polymer ropes and lines for use on water are often designed to float, to aid in their retrieval and to avoid applying a downward

andrew-mc [135]

Answer:

We choose PTFE

Explanation:

Attached are the modulus density and modulus strength chart.

Due to its young modulus, the density is near 0.5 GPa, as seen in the chart and support water gliding. The PTFE density is between 1 and 10 Mg / cubic meter (see module and chart of density), and the resistance is between 10 and 100 Mpa (see module and chart of strength). Therefore, the finest ploymer will be PTFE that meets the requirements.

8 0

3 years ago

3. (5%) you would like to physically separate different materials in a scrap recycling plant. describe at least one method that

Likurg_2 [28]

One of the methods that are used to separate polymers, aluminium alloys, and steels from one another is the Gravitation Separation method.

One straightforward technique is to run the mixture through a magnet, which will keep the steel particles on the magnet and separate them from the polymer.

What is the Gravitation Separation method?

When it is practicable to separate two components using gravity, i.e., when the combination's constituent parts have different specific weights, gravity separation is a technique used in industry. The components can be in suspension or in a dry granular mixture.

Polymers, Steel and Aluminium alloys can be readily split apart. The technique depends on how the two components are combined. The approach used is gravitational density. Due to the significant difference in relative specific mass values between steel and polymers (which range from 1.0 to 1.5), it is possible to separate them using flotation in a liquid that is safe and has the right density.

Therefore, the Gravitation Separation method is used to separate polymers, aluminium alloys and steels.

To learn more about the Polymer from the given link

brainly.com/question/2494725

#SPJ4

8 0

1 year ago

Consider a normal shock wave in air. The upstream conditions are given by M1=3, p1 = 1 atm, and r1 = 1.23 kg/m3. Calculate the d

mart [117]

Answer and Explanation:

The answer is attached below

7 0

3 years ago

Methane and oxygen react in the presence of a catalyst to form formaldehyde. In a parallel reaction, methane is oxidized to carb

Nezavi [6.7K]

Answer:

$y_{CH_4}^2=\frac{5mol/s}{100mol/s}=0.05\\y_{O_2}^2=\frac{3mol/s}{100mol/s}=0.03\\y_{H_2O}^2=\frac{47mol/s}{100mol/s}=0.47\\y_{HCHO}^2=\frac{43mol/s}{100mol/s}=0.43\\y_{CO_2}^2=\frac{2mol/s}{100mol/s}=0.02$

Explanation:

Hello,

a. On the attached document, you can see a brief scheme of the process. Thus, to know the degrees of freedom, we state the following unknowns:

- $\xi_1$ and $\xi_2$ : extent of the reactions (2).

- $F_{O_2}^2$ , $F_{CH_4}^2$ , $F_{H_2O}^2$ , $F_{HCHO}^2$ and $F_{CO_2}^2$ : Molar flows at the second stream (5).

On the other hand, we've got the following equations:

- $F_{O_2}^2=50mol/s-\xi_1-2\xi_2$ : oxygen mole balance.

- $F_{CH_4}^2=50mol/s-\xi_1-\xi_2$ : methane mole balance.

- $F_{H_2O}^2=\xi_1+2\xi_2$ : water mole balance.

- $F_{HCHO}^2=\xi_1$ : formaldehyde mole balance.

- $F_{CO_2}^2=\xi_2$ : carbon dioxide mole balance.

Thus, the degrees of freedom are:

$DF=7unknowns-5equations=2$

It means that we need two additional equations or data to solve the problem.

b. Here, the two missing data are given. For the fractional conversion of methane, we define:

$0.900=\frac{\xi_1+\xi_2}{50mol/s}$

And for the fractional yield of formaldehyde we can set it in terms of methane as the reagents are equimolar:

$0.860=\frac{F_{HCHO}^2}{50mol/s}$

In such a way, one realizes that the output formaldehyde's molar flow is:

$F_{HCHO}^2=0.860*50mol/s=43mol/s$

Which is equal to the first reaction extent $\xi_1$ , therefore, one computes the second one from the fractional conversion of methane as:

$\xi_2=0.900*50mol/s-\xi_1\\\xi_2=0.900*50mol/s-43mol/s\\\xi_2=2mol/s$

Now, one computes the rest of the output flows via:

- $F_{O_2}^2=50mol/s-43mol/s-2*2mol/s=3mol/s$

- $F_{CH_4}^2=50mol/s-43mol/s-2mol/s=5mol/s$

- $F_{H_2O}^2=43mol/s+2*2mol/s=47mol/s$

- $F_{HCHO}^2=43mol/s$

- $F_{CO_2}^2=2mol/s$

The total output molar flow is:

$F_{O_2}+F_{CH_4}+F_{H_2O}+F_{HCHO}+F_{CO_2}=100mol/s$

Therefore the output stream composition turns out into:

$y_{CH_4}^2=\frac{5mol/s}{100mol/s}=0.05\\y_{O_2}^2=\frac{3mol/s}{100mol/s}=0.03\\y_{H_2O}^2=\frac{47mol/s}{100mol/s}=0.47\\y_{HCHO}^2=\frac{43mol/s}{100mol/s}=0.43\\y_{CO_2}^2=\frac{2mol/s}{100mol/s}=0.02$

Best regards.

7 0

2 years ago