All categories

3 years ago

PLEASE HELP IM ACTUALLY SHAKING IM REALLY LATE

1 answer:

4 0

The independent variable - the order of when they pour the milk (Christie poured milk first then sugar and Tim did the opposite)

The dependent variable - whether the sugar dissolves or not

The constants - 5 teaspoons of sugar, 5 second stir, same coffee

You might be interested in

How much does it cost to operate a 550 W Toaster for 6 hours. If electrical energy cost 12.0 cents per kW.H

miss Akunina [59]

Answer:

6.6 cents a month!!!

8 0

3 years ago

A single strain gage has a nominal resistance of 120 ohm. For a quarter bridge with 120 ohm fixed resistors, strain gauge factor

natita [175]

Answer:

Output voltage is 1.507 mV

Solution:

As per the question:

Nominal resistance, R = $120\Omega$

Fixed resistance, R = $120\Omega$

Gauge Factor, G.F = 2.01

Supply Voltage, $V_{s} = 3\ V$

Strain, $\epsilon = 1000\times 10^{-6}\ strain$

Now,

To calculate the output voltage, $V_{o}$ :

WE know that strain is given by:

$\epsilon = \frac{(R + R')^{2}V_{o}}{RR'V_{s}\times G.F}$

Thus

$V_{o} = \frac{RR'V_{s}\epsilon \times G.F}{(R + R')^{2}}$

Now, substituting the suitable values in the above eqn:

$V_{o} = \frac{120\times 120\times 3\times 1000\times 10^{-6}\times 2.01}{(120 + 120)^{2}}$

$V_{o} = 1.507\ mV$

6 0

4 years ago

A wire with a circular cross section and a resistance R is lengthened to 9.66 times its original length by pulling it through a

damaskus [11]

Answer:

The resistance of the wire after it is stretched is 93.31R.

Explanation:

Resistance is the property of the material to oppose the current flow through it. It is given by the relation :

R = (ρl)/A

Here ρ is resistivity, l is length of wire and A is the area of the wire.

Let l₀, and A₀ are the original length and original circular cross section area of the wire. while l₁ and A₁ are the new length and new circular cross section area of the wire.

Volume of the original wire, V₀ = A₀ x l₀

Volume of the new wire, V₁ = A₁ x l₁

According to the problem. volume remain same. So,

V₀ = V₁

A₀ x l₀ = A₁ x l₁

It is given that l₁ = 9.66 x l₀. Substitute this value in the above equation;

A₀ x l₀ = A₁ x 9.66 x l₀

A₁ = A₀/9.66

Resistance of the original wire, R = (ρl₀)/A₀

Resistance of the new wire, R₁ = (ρl₁)/A₁

Substitute the value of l₁ and A₁ in the above equation.

R₁ = (ρ x l₀ x 9.66)/(A₀/9.66) = 93.31 x (ρl₀)/A₀

But (ρl₀)/A₀ = R. hence,

R₁ = 93.31 R

8 0

3 years ago

If a projectile is fired straight up at a speed of 10 m/s, the time it takes to reach the top of its path is about

UNO [17]

Answer:

A. The time it takes the projectile to reach the top of its path is about 1 second.

Explanation:

Hi there!

The equation of the velocity of a projectile fired straight up is the following:

v = v0 + g · t

Where:

v = velocity of the projectile.

v0 = initial velocity.

g = acceleration due to gravity (≅ -9.8 m/s² considering the upward direction as positive)

t = time.

When the projectile reaches the top of its path, its velocity is zero, then, using the equation of velocity, we can solve it for the time:

v = v0 + g · t

0 = 10 m/s - 9.8 m/s² · t

t = -10 m/s / -9.8 m/s²

t = 1.0 s

The time it takes the projectile to reach the top of its path is about 1 second.

7 0

3 years ago

A flat, circular loop has 18 turns. The radius of the loop is 15.0 cm and the current through the wire is 0.51 A. Determine the

Ostrovityanka [42]

Answer:

The magnitude of the magnetic field at the center of the loop is 3.846 x 10⁻⁵ T.

Explanation:

Given;

number of turns of the flat circular loop, N = 18 turns

radius of the loop, R = 15.0 cm = 0.15 m

current through the wire, I = 0.51 A

The magnetic field through the center of the loop is given by;

$B = \frac{N\mu_o I}{2R}$

Where;

μ₀ is permeability of free space = 4π x 10⁻⁷ m/A

$B = \frac{N\mu_o I}{2R} \\\\B = \frac{18*4\pi*10^{-7} *0.51}{2*0.15} \\\\B = 3.846 *10^{-5} \ T$

Therefore, the magnitude of the magnetic field at the center of the loop is 3.846 x 10⁻⁵ T.

6 0

4 years ago