Location & Sunlight Availability.
Solar Panels use a large amount of space.
The Sun isn't always present.
Solar Energy is Inefficient.
There is an overlooked Pollution & Environmental Impact.
Expensive Energy Storage.
High Initial Cost.
Answer:
The force exerted is 318.86 N
Explanation:
The force exerted by such a stream is calculated by multiplying the mass flow rate of water by the velocity of the stream of water.
mass flow rate = 21.4 kg/s
velocity = 14.9 m/s
Force exerted = 21.4 kg/s × 14.9 m/s = 318.86 kgm/s^2 = 318.86 N
Answer:
minimum length of a surface crack is 18.3 mm
Explanation:
Given data
plane strain fracture toughness K = 82.4 MPa m1/2
stress σ = 345 MPa
Y = 1
to find out
the minimum length of a surface crack
solution
we will calculate length by this formula
length = 1/π ( K / σ Y)²
put all value
length = 1/π ( K / σ Y)²
length = 1/π ( 82.4
/ 345× 1)²
length = 18.3 mm
minimum length of a surface crack is 18.3 mm
Using
F= mv²/r
4 = 0.5×v² / 2
8 /0.5 = v²
v²=16
v= √16
v= 4 ms-¹
The atoms of some materials have no free electrons in their outer orbits. These electrons are busy doing other jobs, like being shared in the orbits of two adjacent atoms. They are so closely held that it is very difficult to pull them away. Most compounds of carbon and hydrogen are like this.
<span>Plastics, whose molecules are made from long combinations of carbon and hydrogen atoms, have few or no free electrons. This means that plastics are poor conductors of electricity (and they are also poor conductors of heat). hope that helped.</span>