The yoga term asanas are which of the following?

Two toy cars (m1 = 0.200 kg and m2 = 0.250 kg) are held together rear to rear with a compressed spring between them. When they a

timurjin [86]

Answer:

Acceleration of the second particle at that moment is given as

$a_2 = 2.12 m/s^2$

Explanation:

As we know that both cars are connected by same spring

So on this system of two cars there is no external force

So we will have

$F = 0 = m_1a_1 + m_2a_2$

now we have

$m_1 = 0.200 kg$

$m_2 = 0.250 kg$

$a_1 = 2.65 m/s^2$

now we have

$0.200(2.65) + 0.250a_2 = 0$

so we have

$a_2 = 2.12 m/s^2$

8 0

3 years ago

What magnification is best for the observation of most tissue slides? Explain why this has proved to be true?

Komok [63]

Answer:

The 10X objective is use for the identification of actual size of histology tissues and 4X magnification is best for observation of most tissues slides

Explanation:

4X magnification is best for observation of most tissues slides because it has an objective lens that have lower power and have great high field overview which make it very easier to locate specimens on the slide. It is use to get the overview of histology slides. It is use to showcase more detailed observations about histology.

The 40X objective is use majorly to identify tissue , to observe the finer details and study tissue organization on the histology slide.

7 0

3 years ago

A circular cross section, d = 25 mm, experiences a torque load, T = 25 N·m, and a shear force, V = 85 kN. Calculate the shear st

Maru [420]

Answer:

The correct answer is 231 Mpa i.e option a.

Explanation:

using the equation of torsion we Have

$\frac{T}{I_{p}}=\frac{\tau }{r}\\\\\therefore \tau =\frac{T}{I_{p}}\times r$

where,

$\tau$ = shear stress at a distance 'r' from the center

T = is the applied torque

$I_{p}$ = polar moment of inertia of the section

r = radial distance from the center

Thus we can see that if a point is located at center i.e r = 0 there will be no shearing stresses at the center due to torque.

We know that in case of a circular section the maximum shearing stresses due to a shear force occurs at the center and equals

$\tau _{max}=\frac{4}{3}\times \frac{V}{A}$

Applying values we get

$\tau _{max}=\frac{4}{3}\times \frac{85\times 10^{3}}{0.25\times \pi \times (25\times 10^{-3})^{2}}\\\\\therefore \tau _{max}=230.88Mpa\approx 231Mpa$