The diagram shows how Earth is tilted on its axis as it revolves around the Sun. What is the season in the United States when Ea
1 answer:
You might be interested in
During a rodeo, a clown runs 7.7 m north, turns 49.9 degrees east of north, and runs 6.4 m. Then after waiting for the bull to come near, the clown turns due east and runs 19.8 m to exit the arena. The magnitude of the clown’s displacement is 27 m.
<u>Explanation: </u>
As the clown is running in the north direction for about 7.7 m and then he turns 49.9 degrees east of north. In the east of north, he covers a distance of 6.4 m and then turns east to exit the arena after covering a distance of 19.8 m. Let’s have a simple diagram to easily understand the problem.
In first step, the clown runs 7.7 m in north direction, so the image will be as in fig 1. Then he takes a direction of north east and covers a distance of 6.4 m, so the image will be modified as in fig 2. Then after the bull comes, he turns east and runs 19.8 m to exit the arena, so the image will be as in figure 3.
So, the extension of North line and the East line at a point shown as the dotted line in the above image, forms the total displacement as the hypotenuse of a right angled triangle. The extended dotted lines is nothing but the horizontal and vertical components of the angle 49.9 degree.
By using Pythagoras theorem, the total displacement can be found as
Similarly, the adjacent side of this imaginary triangle is the distance covered by the clown in the North direction.
Thus, the total displacement covered by the clown is
Thus, the total displacement by the clown is 27 m.
Answer:
a) the required time is 0.6283 μs
b) the inductor current is 0.5 mA
Explanation:
Given the data in the question;
The capacitor voltage has its maximum value of 25 V at t = 0
i.e V = V₀ = 25 V
we determine the angular velocity;
ω = 1 / √( LC )
ω = 1 / √( ( 20 × 10⁻³ H ) × ( 8.0 × 10⁻¹² F) )
ω = 1 / √( 1.6 × 10⁻¹³ )
ω = 1 / 0.0000004
ω = 2.5 × 10⁶ s⁻¹
a) How much time does it take until the capacitor is fully discharged for the first time?
V = V₀sin( ωt )
we substitute
25V = 25V × sin( 2.5 × 10⁶ s⁻¹ × t )
25V = 25V × sin( 2.5 × 10⁶ s⁻¹ × t )
divide both sides by 25 V
sin( 2.5 × 10⁶ × t ) = 1
( 2.5 × 10⁶ × t ) = π/2
t = 1.570796 / (2.5 × 10⁶)
t = 0.6283 × 10⁻⁶ s
t = 0.6283 μs
Therefore, the required time is 0.6283 μs
b) What is the inductor current at that time?
(t) = V₀√(C/L) sin(ωt)
{ sin(ωt) = 1 )
(t) = V₀√(C/L)
we substitute
(t) = 25V × √( ( 8.0 × 10⁻¹² F ) / ( 20 × 10⁻³ H ) )
(t) = 25 × 0.00002
(t) = 0.0005 A
(t) = 0.5 mA
Therefore, the inductor current is 0.5 mA
Answer:
Explanation:
Since the wires attract each other , the direction of current will be same in both the wires .
Let I be current in wire which is along x - axis
force of attraction per unit length between the two current carrying wire is given by
x
where I₁ and I₂ are currents in the wires and d is distance between the two
Putting the given values
285 x 10⁻⁶ = 10⁻⁷ x
I₂ = 16.76 A
Current in the wire along x axis is 16.76 A
To find point where magnetic field is zero due the these wires
The point will lie between the two wires as current is in the same direction.
Let at y = y , the neutral point lies
k 2 x = k 2 x
25.5y = 16.76 x .3 - 16.76y
42.26 y = 5.028
y = .119
= .12 m