Correct question is;
A thermal tap used in a certain apparatus consists of a silica rod which fits tightly inside an aluminium tube whose internal diameter is 8mm at 0°C.When the temperature is raised ,the fits is no longer exact. Calculate what change in temperature is necessary to produce a channel whose cross-sectional is equal to that of the tube of 1mm. (linear expansivity of silica = 8 × 10^(-6) /K and linear expansivity of aluminium = 26 × 10^(-6) /K).
Answer:
ΔT = 268.67K
Explanation:
We are given;
d1 = 8mm
d2 = 1mm
At standard temperature and pressure conditions, the temperature is 273K.
Thus; Initial temperature; T1 = 273K,
Using the combined gas law, we have;
P1×V1/T1 = P2×V2/T2
The pressure is constant and so P1 = P2. They will cancel out in the combined gas law to give:
V1/T1 = V2/T2
Now, volume of the tube is given by the formula;V = Area × height = Ah
Thus;
V1 = (πd1²/4)h
V2 = (π(d2)²/4)h
Thus;
(πd1²/4)h/T1 = (π(d2)²/4)h/T2
π, h and 4 will cancel out to give;
d1²/T1 = (d2)²/T2
T2 = ((d2)² × T1)/d1²
T2 = (1² × T1)/8²
T2 = 273/64
T2 = 4.23K
Therefore, Change in temperature is; ΔT = T2 - T1
ΔT = 273 - 4.23
ΔT = 268.67K
Thus, the temperature decreased to 268.67K
The current is defined as the amount of charge transferred through a certain point in a certain time interval:

where
I is the current
Q is the charge

is the time interval
For the lightning bolt in our problem, Q=6.0 C and

, so the average current during the event is
I think this is TRUE. Ph is calculating the acidic acids in water. And you need to know the concentration of hydronium ions. Hope this helped !
Flow chart of a system is a diagrammatic representation of how that system performs it's functions.
<h3>The flow chart of internal combustion engine</h3>
The flow chart of internal combustion engine is the diagrammatic representation of how the engine works.
The inlet valve of the engine is the valve that allows for the entry of fuel-air mixture into the engine.
The exhaust valve of the engine is the allows for the outflow of used gases from the engine.
From the attached flow chart, Intake valves are opened to allow the flow of an air/fuel mixture into the engine's cylinders prior to compression and ignition, while exhaust valves open to permit the expulsion of exhaust gases from the combustion process after ignition has occurred.
Learn more about flow chart here:
brainly.com/question/6532130
#SPJ1