Answer:
During the segments B - C and D - E, the car stopped since the y axis is the distance and the distance stayed the same in between those segments.
For a simpler answer, the flat horizontal lines on the graph are the times when the car was stopped.
Answer and explanation:
When you are changing a car tire, the most important thing is to keep the total diameter as equal as possible.
The total car tire diameter can be calculated as:
The profile of this tire is 75 (the higher/taller relation), therefore a 5 percent lower profile would be:
pr=0.95·75=71.25
The problem is that the profiles are normalized and the nearest profile available is 70.
If we take a theorical tire with a profile of 71.25:
The theorical tire size should be 205/71 R15.
If we look for a real tire size, we should look for a tire with a diameter nearest to 26.5'' and a profile of 70.
The best option for real tire size is: Tire 225/70 R14 (wheel diameter of 26.4'') or 205/70 R15 (wheel diameter of 26.3'').
Answer:
a) d = 6.0 m
Explanation:
Since car is accelerating at uniform rate then here we can say that the distance moved by the car with uniform acceleration is given as
here we know that
now we will have
Answer:
143 °
Explanation:
a ) If d be the distance between slits , λ be wavelength of light used and at angle θ nth dark fringe is formed then
d sinθ = ( 2n+1) λ/2
for first dark fringe
d sinθ = λ/2
d /λ = 1/ 2 sinθ
1 / 2 sin15
= 1.93
b )
For intensity of fringe at angle θ, the relation is
I = I₀ cos²θ
I / I₀ = cos²θ/2
Given I / I₀ =0. 1
0.1 = cos²θ/2
θ/2 = 71.5
θ = 143 °
Answer:
hmax = 1/2 · v²/g
Explanation:
Hi there!
Due to the conservation of energy and since there is no dissipative force (like friction) all the kinetic energy (KE) of the ball has to be converted into gravitational potential energy (PE) when the ball comes to stop.
KE = PE
Where KE is the initial kinetic energy and PE is the final potential energy.
The kinetic energy of the ball is calculated as follows:
KE = 1/2 · m · v²
Where:
m = mass of the ball
v = velocity.
The potential energy is calculated as follows:
PE = m · g · h
Where:
m = mass of the ball.
g = acceleration due to gravity (known value: 9.81 m/s²).
h = height.
At the maximum height, the potential energy is equal to the initial kinetic energy because the energy is conserved, i.e, all the kinetic energy was converted into potential energy (there was no energy dissipation as heat because there was no friction). Then:
PE = KE
m · g · hmax = 1/2 · m · v²
Solving for hmax:
hmax = 1/2 · v² / g
