Liquid Hydrogen is the fuel used by rockets.
Explanation:
- Liquid hydrogen which can be chemically denoted as "
" is often considered as the significant fuels for rocket.
- However rocket in its lower stages uses fuels such as Kerosene and oxygen where as in the higher stages such as second and third stages it uses liquid hydrogen.
- Liquid hydrogen is known to easily cool the nozzle and then also other parts of the rocket before mixing with the oxidizer such as the oxygen.
- Thus liquid hydrogen helps in preventing nozzle erosion and also reduces combustion chamber.
- Liquid hydrogen one the other hand is very expensive as 384,071 gallons of it will cost approximately $376,389.58
.
Thus liquid hydrogen is effectively used as a fuel for rocket.
Answer:
The perceived economic impact of CO2 generated per year by lighting sstem is $8164.67.
Explanation:
The CO2 requirement for the plant is:
Amount of CO2 per year = (2.4 lb / KWh)(300,000 KWh)
Amount of CO2 per year = (720000 lb)(1 ton/ 2204.62 lb)
Amount of CO2 per year = 326.59 ton
The perceived economic impact of CO2 generated per year will then be:
Economic Impact = ($25 / ton)(326.59 ton)
<u>Economic Impact = $8164.67</u>
Explanation:
Precision machining is a subtractive process used in cases where material needs to be removed from a raw product to create the finished product. Precision machining can be used to create a wide variety of products, items, and parts for any number of different objects and materials. These parts usually require tight tolerances variation from nominal dimensions and from part to part, which means that there is not much room for error in the production of the piece. Repeatability and well-controlled tolerances are hallmarks of precision machining. Components, parts and finished durable products that are designed to maintain extremely tight tolerance margins and a high degree of durability are essential and common drivers for utilization of precision machining. For example, parts that need to work together as part of a machine may need to always align within a certain margin of 0.01mm to 0.05mm. Precision engineering and machining help to ensure these parts can not only be made precisely but can be produced with this level of accuracy over and over again.
Answer: c) 450 kPa
Explanation:
Boyle's Law: This law states that pressure is inversely proportional to the volume of the gas at constant temperature and number of moles.
(At constant temperature and number of moles)
where,
= initial pressure of gas = 150 kPa
= final pressure of gas = ?
= initial volume of gas = v L
= final volume of gas = 
Therefore, the new pressure of the gas will be 450 kPa.
Answer:
(a) 0.12924
(b) Taking into consideration significance level of 0.05 yet the value of p is greater than 0.05, it suggests that the coin is fair hence the coin can be used at the beginning of any sport event.
Explanation:
(a)
n=200 for fair coin getting head, p= 0.5
Expectation = np =200*0.5=100
Variance = np(1 - p) = 100(1-0.5)=100*0.5=50
Standard deviation, 
Z value for 108, 
P( x ≥108) = P( z >1.13)= 0.12924
(b)
Taking into consideration significance level of 0.05 yet the value of p is greater than 0.05, it suggests that the coin is fair hence the coin can be used at the beginning of any sport event.
