Answer:
low risk for tissue damage
uses radio waves
the last three are not correct
:)
Answer:
The net displacement of the car is 3 km West
Explanation:
Please see the attached drawing to understand the car's trajectory: First in the East direction for 4 km (indicated by the green arrow that starts at the origin (zero), and stops at position 4 on the right (East).
Then from that position, it moves back towards the West going over its initial path, it goes through the origin and continues for 3 more km completing a moving to the West a total of 7 km. This is indicated in the drawing with an orange trace that end in position 3 to the left (West) of zero.
So, its NET displacement considered from the point of departure (origin at zero) to the final point where the trip ended, is 3 km to the west.
Answer:
Solution
Verified by Toppr
Correct option is
C
3 cm
RI=apparent depthreal depth
Substituting, 34=apparentdepth12
Therefore, apparent depth=412×3=9
The height by which it appears to be raised is 12−9=3cm
Was this answer helpful?
71
0
SIMILAR QUESTIONS
A coin is placed at the bottom of a glass tumbler and then water is added. It appeared that the depth of the coin has been reduced because
Medium
View solution
>
A tank is filled with water to a height of 12.5 cm. The apparent depth of a needle lying at the bottom of the tank is measured by a microscope to be 9.4 cm. What is the refractive index of water? If water is replaced by a liquid of refractive index 1.63 up to the same height, by what distance would the microscope have to be moved to focus on the needle again?
To ensure a steady flight, the standard golf ball has nearly 400 indentations <span>or “dimples” on its surface. The correct option among all the options that are given in the question is the second option or option "B". The other choices are incorrect. I hope that this is the answer that has actually come to your help.</span>
<h3><u>Answer;</u></h3>
producing a path for current to flow
<h3><u>Explanation;</u></h3>
- An AC generator is a device that converts mechanical energy into electrical energy using the principle of electromagnetic induction.
- <em><u>Slip rings are two hollow rings to which two ends of the armature coil are connected. These rings rotate with the rotation of the coil. They function to to allow for electrical contact with the brushes.</u></em>
- Slip rings therefore, provide a means for connecting the rotating armature to an external circuit.
