Momentum = mass • velocity
M = m • v
Speed is a scalar quantity
Velocity is a vector quantity
That is truly the only difference
Answer:
B. 12.0A
Explanation:
The circuit shown in the image is a parallel circuit which mean that the voltage of the source is equal across each resistance in the circuit because they are directly connected to the terminals of the voltage source.
The voltage across the 10 Ohms resistor is 120V
So, let's proceed to calculate the current
By using Ohm's Law

12A is the amount of current flowing through the 10 ohms resistor.
Answer:
what language is
thattranslate i will.answer then
The "objective" (lens or mirror) is the major major major part of
the optical telescope. It's really the only part you need in order
to make a telescope (besides something to hold the objective).
You can put a piece of film or a CCD right at the focal point of
the objective lens or mirror and capture 'images' (pictures) there.
If you want to use the telescope for looking through and seeing stuff
with your eye, then you need the other major part ... the eyepiece lens.
Explanation:
⠀
⠀
(a) <u>The</u><u> </u><u>segment</u><u> </u>A shows acceleration as velocity increases with the increase in time.
⠀
⠀
⠀
(b) <u>The</u><u> </u><u>segment</u><u> </u>C shows the object is slowing down as the time increases in segment C, the velocity decreases and afterwards it comes to rest.
⠀
⠀
⠀
(c) The velocity is segment B is <u>4</u><u>0</u><u>m</u><u>/</u><u>s</u><u>.</u> And in the diagram there is no change in velocity.
⠀
⠀
⠀
(d) The acceleration of segment B is <u>zero</u><u>.</u> As there in no change in curve and it is moving with uniform velocity.
⠀
⠀
⠀

<h2>Thank you!</h2>