A wedge and a screw are similar because they both:

Please help me<br> asdfghjklqwertyuioikjhgfrfghjuhygfdfghjmhgtfhjk

sertanlavr [38]

Answer:

c

Explanation:

the moon moves around earth

5 0

2 years ago

What happens inside when an air-filled, sealed can, is heated?.

g100num [7]

Answer:

It would explode

Explanation:

you're welcome

5 0

2 years ago

Read 2 more answers

Ms. Mary Mack walked around her block from her house for 200 meters. She arrived back at her house in 15 minutes. What was her d

inysia [295]

Answer:

d = 0 [m]

Explanation:

Displacement is understood as the length and direction that a body travels to move from an initial point to an endpoint.

This displacement is represented with a vector or straight line that indicates the distance of the displacement and its length.

This displacement in an easier way to understand. It is the distance between the start point and the endpoint of the journey. Since the second point is equal to the first point, since Mary returns to the same place, there is no difference between the displacement.

Therefore the displacement is zero.

5 0

3 years ago

Scientific _____ must be supported by observations and results many investigations and are not absolute

n200080 [17]

The correct answer you're looking for would be Theories.

7 0

3 years ago

A long, hollow, cylindrical conductor (inner radius 3.4 mm, outer radius 7.3 mm) carries a current of 36 A distributed uniformly

Elden [556K]

Answer:

a. $B= 9.45 \times10^{-3} T$

b. $B= 0.820 T$

c. $B= 0.0584 T$

Explanation:

First, look at the picture to understand the problem before to solve it.

a. d1 = 1.1 mm

Here, the point is located inside the cilinder, just between the wire and the inner layer of the conductor. Therefore, we only consider the wire's current to calculate the magnetic field as follows:

To solve the equations we have to convert all units to those of the international system. (mm→m)

$B=\frac{u_{0}I_{w}}{2\pi d_{1}} =\frac{52 \times4\pi \times10^{-7} }{2\pi 1.1 \times 10^{-3}} =9.45 \times10^{-3} T\\$

μ0 is the constant of proportionality

μ0=4πX10^-7 N*s2/c^2

b. d2=3.6 mm

Here, the point is located in the surface of the cilinder. Therefore, we have to consider the current density of the conductor to calculate the magnetic field as follows:

J: current density

c: outer radius

b: inner radius

The cilinder's current is negative, as it goes on opposite direction than the wire's current.

$J= \frac {-I_{c}}{\pi(c^{2}-b^{2} ) }}$

$J=\frac{-36}{\pi(5.33\times10^{-5}-1.16\times10^{-5}) } =-274.80\times10^{3} A/m^{2}$

$B=\frac{u_{0}(I_{w}-JA_{s})}{2\pi d_{2} } \\A_{s}=\pi (d_{2}^{2}-b^2)=4.40\times10^{-6} m^2\\$

$B=\frac{6.68\times10^{-5}}{8.14\times10^{-5}} =0.820 T$

c. d3=7.4 mm

Here, the point is located out of the cilinder. Therefore, we have to consider both, the conductor's current and the wire's current as follows:

$B=\frac{u_{0}(I_w-I_c)}{2\pi d_3 } =\frac{2.011\times10^-5}{3.441\times10^{-4}} =0.0584 T$

As we see, the magnitud of the magnetic field is greater inside the conductor, because of the density of current and the material's nature.

3 0

3 years ago