Acceleration is in the direction of motion
Explanation:
For air, n1 = 1.00003; for water, n2 = 1.3330
Given: θ2 = 30 degrees, then
θ1 = arcsin [(n2/n1) sin θ2]
= arcsin [(1.3330/1.0003) sin (40)]
= 58.93 degrees
Note that since, in this example, light is traveling from a medium of higher density (water; n2 = 1.3330) to a medium of lower density (air; n1 = 1.0003), then n2 > n1, and the angle of refraction (θ1) is larger than the angle of incidence (θ2), thus the light bends away from the normal (in this example, the vertical) as it leaves the water and enters the air.
Answer:
The time constant τ = L/R represent the time requiered for the curent to get value of 63 % of its maximun value
Explanation:
In a circuit RL ( serie circuit with a resistor R and the inductor L ) when a voltage is applied the inductor will have a reaction, such reaction consist in the creation of an electromotive force which will prevent the current to get its maximun value. The time constant which in the case of an inductor is
τ = L/R , represent the time requiered for the crrent to be 63 % of its final value
Answer:
The answer is A
Explanation:
Someone shouting to you from across a room
Answer:
The smallest film thickness is 117 nm.
Explanation:
Light interference on thin films can be constructive or destructive. Constructive interference is dependent on the film thickness and the refractive index of the medium.
For the first interference (surface nearest to viewer), the minimum thickness can be expressed as:
where n is the refractive index of the bubble film.
Therefore,
∴ 
