All categories

3 years ago

Make the following conversion. 120 mL = _____ cm³ 12.0 1200 120 1.20

Physics

2 answers:

omeli [17]3 years ago

7 0

120 is your answer. 120 mL = 120 cm^3

leonid [27]3 years ago

6 0

Answer : 120

Explanation:

Volume of the gas is defined as the space occupied by a substance. It is expressed in units like L and ml.

All these units of volume are inter convertible.

We are given:

Volume of the gas = 120 ml

Converting this unit of volume into $cm^3$ by using conversion factor:

$1ml=1cm^3$

Thus 120 ml= $\frac{1}{1}\times 120=120cm^3$

Thus the volume is $120cm^3$

You might be interested in

During a total lunar eclipse, where is the Moon located?

krok68 [10]

During a total lunar eclipse, the Moon located in the umbra. The answer is letter A. For a total lunar eclipse to occur, the Sun, Earth and Moon must be aligned in a straight line. The Earth’s umbra complete covers the Moon. The earth’s umbra is about 870,000 miles wide.

5 0

3 years ago

9. A radioisotope has a half-life of 4.50 min and an initial decay rate of 8400 Bq. What will be

Akimi4 [234]

Answer:

525 Bq

Explanation:

The decay rate is directly proportional to the amount of radioisotope, so we can use the half-life equation:

A = A₀ (½)^(t / T)

A is the final amount

A₀ is the initial amount,

t is the time,

T is the half life

A = (8400 Bq) (½)^(18.0 min / 4.50 min)

A = (8400 Bq) (½)^4

A = (8400 Bq) (1/16)

A = 525 Bq

8 0

4 years ago

Two objects carry initial charges that are q1 and q2, respectively, where |q2| > |q1|. They are located 0.160 m apart and beh

mart [117]

Answer:

$\rm |q_1|=8.0\times 10^{-7}\ C,\ \ \ |q_2| = 4.6\times 10^{-6}\ C.$

Explanation:

According to the Coulomb's law, the magnitude of the electrostatic force between two static point charges $\rm q_1$ and $\rm q_1$ , separated by a distance $\rm r$ , is given by

$\rm F = \dfrac{kq_1q_2}{r^2}.$

where k is the Coulomb's constant.

Initially,

$\rm r = 0.160\ m\\F_i = -1.30\ N.\\\\and \ \ |q_2|>|q_1|.$

The negative sign is taken with force F because the force is attractive.

Therefore, the initial electrostatic force between the charges is given by

$\rm F_i = \dfrac{kq_1q_2}{r^2}.\\-1.30=\dfrac{kq_1q_2}{0.160^2}\\\rm\Rightarrow q_2 = \dfrac{-1.30\times 0.160^2}{q_1k}\ \ \ ..............\ (1).$

Now, the objects are then brought into contact, so the net charge is shared equally, and then they are returned to their initial positions.

The force is now repulsive, therefore, $\rm F_f = +1.30\ N.$

The new charges on the two objects are

$\rm q_1'=q_2' = \dfrac{q_1+q_2}{2}.$

The new force is given by

$\rm F_f = \dfrac{kq_1'q_2'}{r^2}\\+1.30=\dfrac{k\left (\dfrac{q_1+q_2}{2}\right )\left (\dfrac{q_1+q_2}{2}\right )}{0.160^2}\\\Rightarrow \left (\dfrac{q_1+q_2}{2}\right )^2=\dfrac{+1.30\times 0.160^2}{k}\\(q_1+q_2)^2=\dfrac{4\times 1.30\times 0.160^2}{k}\\q_1^2+q_2^2+2q_1q_2=\dfrac{4\times 1.30\times 0.160^2}{k}\\\\$

Using (1),

$\rm q_1^2+\left ( \dfrac{-1.30\times 0.160^2}{q_1k}\right )^2+2\left (\dfrac{-1.30\times 0.160^2}{k} \right )=\dfrac{4\times 1.30\times 0.160^2}{k}\\q_1^2+\dfrac 1{q_1^2}\left ( \dfrac{-1.30\times 0.160^2}{k}\right )^2-\left (\dfrac{6\times 1.30\times 0.160^2}{k} \right )=0\\q_1^4+\left ( \dfrac{-1.30\times 0.160^2}{k}\right )^2-q_1^2\left (\dfrac{6\times 1.30\times 0.160^2}{k} \right )=0$

$\rm q_1^4+\left ( \dfrac{-1.30\times 0.160^2}{k}\right )^2-q_1^2\left (\dfrac{6\times 1.30\times 0.160^2}{k} \right )=0\\q_1^4+\left ( \dfrac{-1.30\times 0.160^2}{9\times 10^9}\right )^2-q_1^2\left (\dfrac{6\times 1.30\times 0.160^2}{9\times 10^9} \right )=0\\q_1^4-q_1^2\left (\dfrac{6\times 1.30\times 0.160^2}{9\times 10^9} \right )+\left ( \dfrac{-1.30\times 0.160^2}{9\times 10^9}\right )^2=0$

$\rm q_1^4-q_1^2\left (2.22\times 10^{-11} \right )+\left ( 1.37\times 10^{-23}\right ) =0\\\Rightarrow q_1^2 = \dfrac{-(-2.22\times 10^{-11})\pm \sqrt{(-2.22\times 10^{-11})^2-4\cdot (1)\cdot (1.37\times 10^{-23})}}{2}\\=1.11\times 10^{-11}\pm 1.046\times 10^{-11}.\\=6.4\times 10^{-13}\ \ \ or\ \ \ 2.156\times 10^{-11}\\\Rightarrow q_1 = \pm 8.00\times 10^{-7}\ C\ \ \ or\ \ \ \pm 4.64\times 10^{-6}\ C.$

Using (1),

When $\rm q_1 = \pm 8.00\times 10^{-7}\ C$ ,

$\rm q_2=\dfrac{-1.30\times 0.160^2}{\pm 8.00\times 10^{-7}\times 9\times 10^9}=\mp4.6\times 10^{-6}\ C.$

When $\rm q_1=\pm 4.6\times 10^{-6}\ C$ ,

$\rm q_2=\dfrac{-1.30\times 0.160^2}{\pm 4.64\times 10^{-6}\times 9\times 10^9}=\mp7.97\times 10^{-7}\ C\approx 8.0\times 10^{-7}\ C.$

Since, $\rm |q_2|>|q_1|$

Therefore, $\rm |q_1|=8.0\times 10^{-7}\ C,\ \ \ |q_2| = 4.6\times 10^{-6}\ C.$

7 0

3 years ago

Technician A says that the cooling system should be tested for leaks using a pressure-operated pressure pump. Technician B says

mart [117]

Answer:

The correct option is;

Technician A only

Explanation:

Leaks in the cooling system parts such as the radiator cap can be tested with a pressure operated hand pump by attaching the pump cap to the pump with an adaptor and apply pressure enough for there to be a release of pressure at the cap.

The pressure added to the system should be maintained for up to two minutes. If the pressure drops quicker, then there is likely to be leaks in the system

The freezing and boiling point of the coolant is measured with an antifreeze tester which carries the appropriate apparatus to measure the coolants freezing and boiling points.

3 0

3 years ago

Which scenario would be classified as a conceptual model

den301095 [7]

Answer:

Heyo! (Ish Mash Potato) XD

Explanation:

A conceptual model is a representation of a system, made of the composition of concepts which are used to help people know, understand, or simulate a subject the model represents. It is also a set of concepts. Some models are physical objects; for example, a toy model which may be assembled, and may be made to work like the object it represents.

Hope Mr. Mash Potato Helped!!!

3 0

3 years ago

Read 2 more answers