All categories

3 years ago

An eyewash station needs to be located no more than 10 seconds or less than 55 feet away from a work area.

1 answer:

6 0

However, some of the requirements include that eyewash stations be located no more than 10 seconds (or about 55 feet) from hazardous work areas. The station should be located on the same level as the hazard, have a clear path for travel, be installed in a well-lit area, and be marked with a visible safety sign

You might be interested in

Which of the following requires formwork?

vekshin1

Answer:

Explanation:

Masonry uses stone work, making a stone wall requires perfect masonry.

3 0

3 years ago

n the Spring of 2015, three utility companies in the Ukraine received email purporting to come from Ukraine's parliament, the Ra

Tresset [83]

Answer:

Trojan horse

Explanation:

A trojan horse attack is a type of malware that misleads users, as it appears unsuspicious at first, but actually presents a threat to the user. A common example is that of an email that contains a malicious attachment. Another common example is that of a fake advertisement. The name comes from the Greek story of the Trojan horse that led to the fall of the city of Troy.

5 0

3 years ago

What are the advantages and disadvantages of a mine heardgear

Irina18 [472]

Answer:

If there is a shaft with headgear, then mining can take place until that depth of the shaft. If it is accessed horizontal Adits, it can mine until the lowest Adit from upwards. If it is accessed decline, the development and mining can continue so long as economic exploitation is possible.

Explanation:

What are the disadvantages of mining headgear? They totally cut off your vision of anything above your head. They are hot, most of the time

7 0

2 years ago

A body whose velocity is constant has a. positive acceleration b. negative acceleration g. zero acceleration d. all of the above

adoni [48]

Answer:

option (c) is the correct answer which is zero acceleration.

Explanation:

It is given in the question that the velocity is constant.

Now,

the options are provided in relation to the acceleration.

We know,

acceleration is rate of change of velocity per unit time i.e

acceleration = $\frac{dV}{dt}$

since, the change in velocity is given to be zero,

thus, dV/dt = 0

hence,

acceleration = 0

therefore, option (c) is the correct answer which is zero acceleration.

4 0

4 years ago

An industrial plant consists of several 60 Hz single-phase motors with low power factor. The plant absorbs 600 kW with a power f

Gelneren [198K]

Answer:

(a) $Q=332$ $kvar$ and $C=5.66$ $uF$

(b) $pf=0.90$ lagging

Explanation:

Given Data:

$P=600kW$

$V=12.47kV$

$f=60Hz$

$pf_{old} =0.75$

$pf_{new} =0.95$

(a) Find the required kVAR rating of a capacitor

$\alpha _{old}=cos^{-1}(0.75) =41.41$ °

$\alpha _{new}=cos^{-1}(0.95) =18.19$ °

The required compensation reactive power can be found by

$Q=P(tan(\alpha_{old}) - tan(\alpha_{new}))$

$Q=600(tan(41.41) - tan(18.19))$

$Q=332$ $kvar$

The corresponding capacitor value can be found by

$C=Q/2\pi fV^{2}$

$C=332/2*\pi *60*12.47^{2}$

$C=5.66$ $uF$

(b) calculate the resultant supply power factor

First convert the hp into kW

$P_{mech} =250*746=186.5$ $kW$

Find the electrical power (real power) of the motor

$P_{elec} =P_{mech}/n$

where $n$ is the efficiency of the motor

$P_{elec} =186.5/0.80=233.125$ $kW$

The current in the motor is

$I_{m} =(P/\*V*pf)$

The pf of motor is 0.85 Leading

Note that represents the angle in complex notation (polar form)

$I_{m} =(233.125/12.47*0.85)$

$I_{m}=18.694+11.586$ $j$ $A$

Now find the Load current

pf of load is 0.75 lagging (notice the minus sign)

$I_{load} =(600/12.47*0.75)$

$I_{load} =48.115-42.433$ $j$ $A$

Now the supply current is the current flowing in the load plus the current flowing in the motor

$I_{supply} =I_{m} + I_{load}$

$I_{supply}= (18.694+11.586)+(48.115-42.433)$

$I_{supply} =66.809-30.847j$ $A$

or in polar form

$I_{supply} =73.58$ °

Which means that the supply current lags the supply voltage by 24.78

therefore, the supply power factor is

$pf=cos(24.78)=0.90$ lagging

Which makes sense because original power factor was 0.75 then we installed synchronous motor which resulted in improved power factor of 0.90

8 0

4 years ago