Answer:
P = 80.922 KW
Explanation:
Given data;
Length of load arm is 900 mm = 0.9 m
Spring balanced read 16 N
Applied weight is 500 N
Rotational speed is 1774 rpm
we know that power is given as
T Torque = (w -s) L = (500 - 16)0.9 = 435.6 Nm
angular speed 
Therefore Power is
P = 80.922 KW
Answer:
yes.
Explanation:
because all websites use coding
Answer:
Explanation:
For automobile emission, a uniform standard is preferred, because no unnecessary advantage is given by it to any company that is located in particular states where the regional standards are less severe.
Since pollution has its impact across the states and in the whole of the USA, then there should be uniform standards across all the states. It will also invalidate the impact of regional standards as a factor in the selection of plant locations for the automobile company. It means that a state offering less valid emission standards, will attract more companies to herself and it will be against the other states who care more about the natural environment. It can make more states to opt for the permissive emission standards, that will be more harmful to the USA as a country, than the good. So, a uniform standard is preferred to eliminate it as a factor in plant location decisions.
Yes, uniform standards are beneficial to everyone, because it will bring effective control upon the pollution level because there will be no state where the culprit firm can hide. Besides, it is more effective as efforts done towards environment conservation.
Explanation:
Precision machining is a subtractive process used in cases where material needs to be removed from a raw product to create the finished product. Precision machining can be used to create a wide variety of products, items, and parts for any number of different objects and materials. These parts usually require tight tolerances variation from nominal dimensions and from part to part, which means that there is not much room for error in the production of the piece. Repeatability and well-controlled tolerances are hallmarks of precision machining. Components, parts and finished durable products that are designed to maintain extremely tight tolerance margins and a high degree of durability are essential and common drivers for utilization of precision machining. For example, parts that need to work together as part of a machine may need to always align within a certain margin of 0.01mm to 0.05mm. Precision engineering and machining help to ensure these parts can not only be made precisely but can be produced with this level of accuracy over and over again.
Answer:
a) 24 kg
b) 32 kg
Explanation:
The gauge pressure is of the gas is equal to the weight of the piston divided by its area:
p = P / A
p = m * g / (π/4 * d^2)
Rearranging
p * (π/4 * d^2) = m * g
m = p * (π/4 * d^2) / g
m = 1200 * (π/4 * 0.5^2) / 9.81 = 24 kg
After the weight is added the gauge pressure is 2.8kPa
The mass of piston plus addded weight is
m2 = 2800 * (π/4 * 0.5^2) / 9.81 = 56 kg
56 - 24 = 32 kg
The mass of the added weight is 32 kg.
