A fuse is an electrical safety device which should not blow, which should overheat and melts if current is too high. Its placed in the live wire before the switch. This prevents overheating and catching fire. A fuse have a specific current value for example - 3000 amps. So when choosing a suitable fuse you must use the above minimum value but less than maximum value. For example in a circuit there is 1000W flowing, you should choose more than 1000 amps fuse not less or else, it will melt.
Answer:
I don't knowI think it will break
Answer:
kinetic energy will change by a factor of 1/2
Option C) 1/2 is the correct answer
Explanation:
Given the data in the question;
we know that;
Kinetic energy = 1/2.mv²
given that mass of the object is doubled; m1 = 2m
speed is halved; v1 = V/2
Now, New kinetic energy will be; 1/2.m1v1²
we substitute
Kinetic Energy = 1/2 × 2m × (v/2)²
Kinetic Energy = 1/2 × 2m × (v²/4)
Kinetic Energy = 1/2 × m × (v²/2)
Kinetic Energy = 1/2 [ 1/2mv² ]
Kinetic Energy = 1/2 [ KE ]
Therefore; kinetic energy will change by a factor of 1/2
Option C) 1/2 is the correct answer
<h2>Answer:</h2>
<u>Acceleration is </u><u>-10.57 rad/s² </u>
<u>Time is </u><u>6 seconds</u>
<h2>Explanation:</h2><h3>a) </h3>
u=900rpm= 94.248 rad/s
v =300rpm= 31.416 rad/s
s=60 revolutions= 377 rad
v²= u²+ 2as
31.416² = 94.248²+ 2 * a * 377
a = v²-u² / 2s
a= -10.57 rad/s²
<h3>b) </h3>
Using 1st equation of motion
v-u/a = t
Putting the values
t = (31.4 - 94.2)/-10.57
t = 6 seconds
