Ask question

Ask question

All categories

3 years ago

12

All of the following safety tips are true EXCEPT Select one: a. It is not acceptable to handle broken glass with your bare hands

b. It is acceptable to grasp the electrical cord when removing an electrical plug from its socket c. It is not acceptable to immerse hot glassware in cold water d. It is not acceptable to reuse dirty glassware

1 answer:

netineya [11]3 years ago

8 0

Answer:

Explanation:

B. you would grab the plug closest to the outlet

You might be interested in

A counter-flow double pipe heat exchanger is heat heat water from 20 degrees Celsius to 80 degrees Celsius at the rate of 1.2 kg

lakkis [162]

Answer:

$L=107.6m$

Explanation:

Cold water in: $m_{c}=1.2kg/s, C_{c}=4.18kJ/kg\°C, T_{c,in}=20\°C, T_{c,out}=80\°C$

Hot water in: $m_{h}=2kg/s, C_{h}=4.18kJ/kg\°C, T_{h,in}=160\°C, T_{h,out}=?\°C$

$D=1.5cm=0.015m, U=649W/m^{2}K, LMTD=?\°C, A_{s}=?m^{2},L=?m$

Step 1: Determine the rate of heat transfer in the heat exchanger

$Q=m_{c}C_{c}(T_{c,out}-T_{c,in})$

$Q=1.2*4.18*(80-20)$

$Q=1.2*4.18*(80-20)$

$Q=300.96kW$

Step 2: Determine outlet temperature of hot water

$Q=m_{h}C_{h}(T_{h,in}-T_{h,out})$

$300.96=2*4.18*(160-T_{h,out})$

$T_{h,out}=124\°C$

Step 3: Determine the Logarithmic Mean Temperature Difference (LMTD)

$dT_{1}=T_{h,in}-T_{c,out}$

$dT_{1}=160-80$

$dT_{1}=80\°C$

$dT_{2}=T_{h,out}-T_{c,in}$

$dT_{2}=124-20$

$dT_{2}=104\°C$

$LMTD = \frac{dT_{2}-dT_{1}}{ln(\frac{dT_{2}}{dT_{1}})}$

$LMTD = \frac{104-80}{ln(\frac{104}{80})}$

$LMTD = \frac{24}{ln(1.3)}$

$LMTD = 91.48\°C$

Step 4: Determine required surface area of heat exchanger

$Q=UA_{s}LMTD$

$300.96*10^{3}=649*A_{s}*91.48$

$A_{s}=5.07m^{2}$

Step 5: Determine length of heat exchanger

$A_{s}=piDL$

$5.07=pi*0.015*L$

$L=107.57m$

7 0

2 years ago

What forces are not present in space

ss7ja [257]

Answer:

C.) Weight and distance I believe

Explanation:

7 0

3 years ago

Bending is defined as? A. the application of a load tending to distort a member in one direction. B. the application of opposing

amm1812

Hi how are you today

4 0

2 years ago

As a general rule of thumb, in-line engines are easier to work on than the other cylinder arrangements.

siniylev [52]

Answer:

The general rule of thumb is that the SMALLER a substance's atoms and the STRONGER the bonds, the harder the substance. Two of the strongest forms of chemical bonds are the ionic and covalent bonds.

Explanation:

5 0

2 years ago

Is the flow of power reversible in a worm and wheel gear

nikitadnepr [17]

The flow of power cannot be reversed since the slider could not move the worm gears. Since the input has one continuous tooth and the output has not teeth there is no gear ratio and no change in torque and speed.

8 0

2 years ago