A correctly designed and installed air curtain can be used to prevent what

Water flows in a tube that has a diameter of D= 0.1 m. Determine the Reynolds number if the average velocity is 10 diameters per

Cloud [144]

Answer:

a) $Re_{D} = 111896.745$ , b) $Re_{D} = 1.119\times 10^{-7}$

Explanation:

a) The Reynolds number for the water flowing in a circular tube is:

$Re_{D} = \frac{\rho\cdot v\cdot D}{\mu}$

Let assume that density and dynamic viscosity at 25 °C are $997\,\frac{kg}{m^{3}}$ $0.891\times 10^{-3}\,\frac{kg}{m\cdot s}$ , respectively. Then:

$Re_{D}=\frac{(997\,\frac{kg}{m^{3}} )\cdot (1\,\frac{m}{s} )\cdot (0.1\,m)}{0.891\times 10^{-3}\,\frac{kg}{m\cdot s} }$

$Re_{D} = 111896.745$

b) The result is:

$Re_{D}=\frac{(997\,\frac{kg}{m^{3}} )\cdot (10^{-6}\,\frac{m}{s} )\cdot (10^{-7}\,m)}{0.891\times 10^{-3}\,\frac{kg}{m\cdot s} }$

$Re_{D} = 1.119\times 10^{-7}$

6 0

4 years ago

The tolerance for a geometric can be easily identified by reading the _________.

baherus [9]

Answer:

C

Explanation:

4 0

3 years ago

Read 2 more answers

Solve the problem with conditions if a wall has inner and outer surface temperatures of 16 and 6 C, respectively. The interior a

Angelina_Jolie [31]

Answer:

Heat flux is 20 W/m^2

Explanation:

Heat flux (Q) is computed as

$Q = h \, \Delta T$

where h is heat transfer coefficient and ΔT is the difference between body's temperature

From the interior air to the inner wall

$Q = 5 \frac{W}{m^2 K} \, 4 K$

$Q = 20 \frac{W}{m^2}$

From the the outer wall to the exterior air

$Q = 20 \frac{W}{m^2 K} \, 1 K$

$Q = 20 \frac{W}{m^2}$

The wall is under steady-state condition because heat flux is constant

7 0

4 years ago

When we utilize a visualization on paper/screen, that visualization is limited to exploring: Group of answer choices Relationshi

Mila [183]

Answer:

As many variables as we can coherently communicate in 2 dimensions

Explanation:

Visualization is a descriptive analytical technique that enables people to see trends and dependencies of data with the aid of graphical information tools. Some of the examples of visualization techniques are pie charts, graphs, bar charts, maps, scatter plots, correlation matrices etc.

When we utilize a visualization on paper/screen, that visualization is limited to exploring as many variables as we can coherently communicate in 2-dimensions (2D).

6 0

3 years ago

Drivers education - Unit 3

melamori03 [73]

The following scenarios are pertinent to driving conditions that one may encounter. See the following rules of driving.

<h3>What do you do when the car is forced into the guardrail?</h3>

Best response:

I'll keep my hands on the wheel and slow down gradually.
The reason I keep my hands on the steering wheel is to avoid losing control.
This will allow me to slowly back away from the guard rail.
The next phase is to gradually return to the fast lane.
Slamming on the brakes at this moment would result in a collision with the car behind.

Scenario 2: When driving on a wet road and the car begins to slide

Best response:

It is not advised to accelerate.
Pumping the brakes is not recommended.
Even lightly depressing and holding down the brake pedal is not recommended.
The best thing to do is take one foot off the gas pedal.
There should be no severe twists at this time.

Scenario 3: When you are in slow traffic and you hear the siren of an ambulance behind

Best response:

The best thing to do at this moment is to go to the right side of the lane and come to a complete stop.
This helps to keep the patient in the ambulance alive.
It also provide a clear path for the ambulance.
Moving to the left is NOT recommended.
This will exacerbate the situation. If there is no place to park on the right shoulder of the road, it is preferable to stay in the lane.

Learn more about rules of driving. at;

brainly.com/question/8384066

#SPJ1

4 0

2 years ago