Answer:
I hope following attachment will help you a lot!
Explanation:
Answer:
All 4 could be justified.
Explanation:
They all represent ultimate improvement.
mechanism, in mechanical construction, the means employed to transmit and modify motion in a machine or any assemblage of mechanical parts.
Answer:
Both Techs A and B
Explanation:
Electronic braking systems are controlled by the electronic brake control module. It is a microprocessor that processes information from wheel-speed sensors and the hydraulic brake system to determine when to release braking pressure at a wheel that's about to lock up and start skidding and activates the anti lock braking system or traction system when it detects it is necessary.
Some electronic brake control modules can be programmed to the size of the vehicle's new tires to restore proper electronic brake control performance. While others may require replacing the module to match the module's programming to the installed tire size. So, both technicians A and B are correct.
Answer:
the maximum length of the specimen before deformation is 0.4366 m
Explanation:
Given the data in the question;
Elastic modulus E = 124 GPa = 124 × 10⁹ Nm⁻²
cross-sectional diameter D = 4.2 mm = 4.2 × 10⁻³ m
tensile load F = 1810 N
maximum allowable elongation Δl = 0.46 mm = 0.46 × 10⁻³ m
Now to calculate the maximum length 
for the deformation, we use the following relation;
= [ Δl × E × π × D² ] / 4F
so we substitute our values into the formula
= [ (0.46 × 10⁻³) × (124 × 10⁹) × π × (4.2 × 10⁻³)² ] / ( 4 × 1810 )
= 3161.025289 / 7240
= 0.4366 m
Therefore, the maximum length of the specimen before deformation is 0.4366 m
