Answer:
(a) Increases
(b) Increases
(c) Increases
(d) Increases
(e) Decreases
Explanation:
The tensile modulus of a semi-crystalline polymer depends on the given factors as:
(a) Molecular Weight:
It increases with the increase in the molecular weight of the polymer.
(b) Degree of crystallinity:
Tensile strength of the semi-crystalline polymer increases with the increase in the degree of crystallinity of the polymer.
(c) Deformation by drawing:
The deformation by drawing in the polymer results in the finely oriented chain structure of the polymer with the greater inter chain secondary bonding structure resulting in the increase in the tensile strength of the polymer.
(d) Annealing of an undeformed material:
This also results in an increase in the tensile strength of the material.
(e) Annealing of a drawn material:
A semi crystalline material which is drawn when annealed results in the decreased tensile strength of the material.
Answer:
No, the claim is not reasonable for 20 W electric power consumption.
It is reasonable for 40 W electric power consumption.
Explanation:
Power = (1/2)*mass flow rate*(square of velocity)
mass flow rate = 1 kg/s
velocity = 8 m/s
square of velocity = 64 m^2 / s^2
Power = (1/2)*(1)*(64)
Power = 32 W
For a fan that consumes 20 W power it is not possible to deliver more power than 20 W but this one is delivering 32 W hence it is a false claim.
For a fan that consumes 40 W it is indeed possible to deliver 32 W considering the efficiency. Hence this claim is reasonable.
Answer:
Bending stress at point 3.96 is \sigma_b = 1.37 psi
Explanation:
Given data:
Bending Moment M is 4.176 ft-lb = 50.12 in- lb
moment of inertia I = 144 inc^4
y = 3.96 in

putting all value to get bending stress

Bending stress at point 3.96 is
= 1.37 psi