7.86 is the pOH of water at this temperature of 100 degrees celsius.
Option E is the right answer.
Explanation:
Data given:
Kw = 51.3 x 
pOH = ?
we know that pure water is neutral and will have pH pf 7.
The equation for relation between Kw and H+ and OH- ion is given by:
Kw = [H+] [OH-}
here the concentration of H+ ion and OH- ion is equal
so, [H+]= [OH-]
Putting the values in the equation of Kw
pKw = -log[Kw]
pKw = -log [51.3 x
]
pKw = 12.28
since H+ ion OH ion concentration is equal the pH of water is half i.e. 6.14
Now, pOH is calculated by using the equation:
14 = pOH + pH
14- 6.14 = pOH
pOH = 7.86
Answer:
Oxygen comes 8th on the periodic table which is the atomic number.
Explanation:
but Oxygen 13 (Isotopes of Oxygen) is when oxygen has 8 protons and electrons, and 5 neutrons (8+5=13)
<span>Chemically speaking, rust is a base and any acid will remove it. The choice of acid is going to be the thing to consider, since acid + base = salt and water. Phosphoric acid left a residue because the salt Iron phosphate is insoluble in water. Iron's soluble salts include the chloride, the sulfate and the nitrate. Industrially speaking, you need to "pickle" your iron. Pickling is a process in which dilute sulfuric acid is used to remove any surface corrosion prior to either painting or plating an iron surface. Sulfuric acid is ordinary battery acid and the salt Iron sulfate is not toxic. Sulfuric acid is one of the most common acids used (besides hydrochloric acid). The dilute kind is not terribly corrosive but concentrated sulfuric acid is a thick, syrupy liquid which can cause some nasty chemical burns if allowed to remain on the skin. It also heats up quite a lot when water is added, so this is an "Acid to water not water to acid" situation. The other choice is Hydrochloric acid, known as muriatic acid. The 20% concentrate is available in nearly any hardware store. It isn't as corrosive as concentrated sulfuric acid, but it has a burning, acrid stench, so never use the concentrate without adequate ventilation. It is ordinarily used to remove hard water deposits (boiler scale) but does a good on on rust as well. Concentrated Iron chloride isn't entirely inert but lots of rinsing will turn it back into harmless rust/sludge, especially if the rince water is naturally hard. Nitric acid will remove corrosion from anything, but it is extremely corrosive, smells worse then Hydrochloric acid and isn't easy to get, since it can be used to create some powerful explosives</span>
Answer:
The right solution is "-602.69 KJ heat".
Explanation:
According to the question,
The 100.0 g of carbon dioxide:
= 
= 
We know that 16 moles of
formation associates with -11018 kJ of heat, then
0.8747 moles
formation associates with,
= 
= 
=
Answer:
<h2>The Alkali metal halide may precipitate or there may be no change at all</h2>
Explanation:
Alkali metal cations are positively charged. Halogen anions are negatively charged. When a solution of Alkali metal cations is added to a solution of Halogen anions, there are two possibilities :
- The alkali metal halide( salt formed from reation of the two ions) may precipitate if the Ionic product is higher than the Solubility product.
- However, if it can remain in the solution, it will remain so. No chemical changes happen with respect to these both ions. Nothing willl happen.
There is no reaction happening in either of the cases because both species are already in ionic form before addition, hence they continue to be in this form.