Answer:
John should detail his Scrum Master.
Explanation:
The Team Lead or Scrum Master coordinates the tasks of individual team members and supports the progress of the team. The Scrum Master usually receives instructions from the Product Owner and then ensures that the tasks are performed accordingly. She also coaches the Development Team and works with the Product Owner to carry out daily development activities. She also drives the Scrum Values and Principles, ensuring that the team members understand and practice them.
Answer:
The shear plane angle and shear strain are 28.21° and 2.155 respectively.
Explanation:
(a)
Orthogonal cutting is the cutting process in which cutting direction or cutting velocity is perpendicular to the cutting edge of the part surface.
Given:
Rake angle is 12°.
Chip thickness before cut is 0.32 mm.
Chip thickness is 0.65 mm.
Calculation:
Step1
Chip reduction ratio is calculated as follows:
r = 0.4923
Step2
Shear angle is calculated as follows:
Here, 
is shear plane angle, r is chip reduction ratio and 
is rake angle.
Substitute all the values in the above equation as follows:
Thus, the shear plane angle is 28.21°.
(b)
Step3
Shears train is calculated as follows:
.
Thus, the shear strain rate is 2.155.
Answer:
sum2 = 0
counter = 0
lst = [65, 78, 21, 33]
while counter < len(lst):
sum2 = sum2 + lst[counter]
counter += 1
Explanation:
The counter variable is initialized to control the while loop and access the numbers in <em>lst</em>
While there are numbers in the <em>lst</em>, loop through <em>lst</em>
Add the numbers in <em>lst</em> to the sum2
Increment <em>counter</em> by 1 after each iteration
Answer: Even low airborne concentrations (100 ppm) of ammonia may produce rapid eye and nose irritation.
